Dumping along trenches can be tricky. But not with the C30R-3TV tracked dumper. The wagon comes mounted on a frame that turns 90° left and 90° right, so you can always see what you’re doing. That’s great for both safety and productivity. Naturally, it’s also a very compact carrier with a width of 1.5 metres, so you can operate on even the smallest job sites. And an ability to spin-turn 360° offers greater machine efficiency and better productivity for you.
At Yanmar, we’re always ahead of the game when it comes to being compact and the C30R-3TV is no different. With a total width of just 1.5 metres, it can turn in even the worst winter conditions. The ability to spin-turn through 360° offers greater efficiency and productivity. And, at just 3.64 metres long, the C30R-3TV is easily transported to your next job. Despite these compact dimensions, the machine packs an impressive payload of 1.50 m3 heaped.
If you work with trenches, it’s safest to dump sideways. That’s why the C30R-3TV is a swing wagon with a frame that can turn 180° (90° left, 90° right). You can dump along the trench while driving, working close-up to what you’re doing, so you can work productively and safely. You’ll also benefit from a mudguard that stops material falling out of the wagon and damaging hydraulic components or getting into the operator area.
At Yanmar, we’re all about compactness and all-terrain capability. That’s why we developed a unique undercarriage that rides even the roughest surfaces while protecting its service life. Track rollers absorb obstacles, while we’ve improved traction force and stability even more by increasing the diameter of the sprocket and the length of the tracks. We distribute mass through 24 rollers to preserve the tracks and provide excellent ground pressure that helps the C30R-3TV work, even in deep mud.
If you can turn 360°, you’ll always face the direction of travel, which can only be good news for safety and for avoiding on-site damage. That’s why we built in automatic hydraulic pressure adjustments that allow for a smooth 360° turn in less than ten seconds (when empty). It won’t stall either, thanks to a new variable-speed hydrostatic transmission system (HST) with an anti-stall feature. The result is better manoeuvrability, improved comfort and increased productivity.
We’re continually looking for new ways to improve the environment and cut fuel costs. So we look closely at how we build our engines. We radically cut nitrogen oxides through exhaust gas recirculation and clean up exhaust emissions with a diesel particulate filter. The auto-deceleration system switches the engine to idle if the levers aren’t touched for four seconds. And an eco-mode controls the engine speed to allow very low fuel consumption. So you save money and drive up productivity.
We build better machines by putting people first. So we developed a proportional control system that moves the machine only as far as you push the joystick lever. Let go and it stops. The left joystick controls speed and the right joystick controls operation. Switch easily between low-speed and high-speed with the automatic dual-speed switch. Use the lock switch to prevent accidental operation. Make fine speed adjustments with the accelerator.
The operator’s seat on the C30R-3TV has a special feature: operator levers that can turn 180°, so you’re always facing the direction of travel. You can always see what you’re doing, so you maximise safety and minimise costly on-site damage.
Raise the lock levers and you automatically activate the parking brake. This stops inadvertent operation or dumping and keeps you safe. To release the brake, simply press the parking switch.